* Choose either of front or top to install a 360mm radiator.
"…One of the things I love the most about this tower is the hard drive drawers. The drawers are stacked at the front of the tower away from all major heat sources and have little tabs you can pinch to slide out your drives. Damaging a hard drive is arguably more detrimental than any other piece of hardware because of the valuable information you store on your PC, …"
"…Building a system with the DarkBlader-G was a breeze. The chassis is well laid out and has plenty of room to work comfortably. The final result looks clean with a lot of space between the components… Cable management required a bit of work to make everything look as neat as possible. I tried to fit the Core Box V2 behind the back cover, but having cables connected on three sides and the motherboard 24pin cable made it impossible. Using the onboard RGB control module would allow for a tidier cable management overall…"
|Case Form Factor||Full Tower|
|Dimensions (WxHxD)||232 x 523 x 518 (mm)
9.13 x 20.59 x 20.39 (in)
|Motherboard Formats||Mini ITX / Micro ATX / ATX / CEB / **E-ATX|
|I/O Panel||USB 3.0 x 2 / Mic x1 / Audio x1 / RGB Control Button x1|
|3.5" Drive Bay||4 max.|
|2.5" Drive Bay||4 max.|
|Cooling Fan Support||Front||140mm x 3 / 120mm x 3|
|Top||140mm x 2 / 120mm x 3|
|Rear||120mm x 1 (pre-installed)|
|Maximun Number of Fans||7 Max.|
|Water Cooling Support||Front||*360mm / 280mm / 240mm / 140mm / 120mm|
|Top||*360mm / 280mm / 240mm / 140mm / 120mm|
|Max. Graphics Card Length||380 (mm) / 15 (in)
(Horizontal graphics card slots are compatible with RTX 3090/3080/3070.)
|Max. CPU Cooler Height||170 (mm) / 6.7 (in)|
|Max. PSU length||200 (mm) / 7.9 (in)|
|Onboard Lighting System||Intergrated Lighting with Addressable RGB LEDs|
and Dynamic Lighting Effects
Warranty and Exchange Policy